
Save Cisco IOS Configuration using Putty
1. Launch putty and connect to your Cisco router or switch 2. Enter the user exec mode router> enable or router> en If password protected, […]
1. Launch putty and connect to your Cisco router or switch 2. Enter the user exec mode router> enable or router> en If password protected, […]
Make sure you are connected to the router through the console port VIA a console cable. Power on the router and log into the […]
Whether your setting up a small home network or an enterprise level system you should always take the time to plan your Network configuration. One […]
Upgrading a Cisco IOS may seem a bit awkward at first, but with a little trial and error you’ll find that it’s not as […]
Copyright © 2021 | Site Developed by Network Education Systems